Fast, licensed, and guaranteed. We solve the toughest Mobile Sandblasting problems in the Plano area before they cost you thousands.
Plano's climate is a beast. Hot summers, freezing winters, and sudden hailstorms. That constant cycle beats the hell out of metal, concrete, and wood. If you own property here, you've seen it: rust creeping up fences, paint peeling off barns, concrete spalling on driveways. It's not just ugly—it's a safety hazard and a money pit.
Plano sits on blackland prairie soil. That soil is heavy, expansive clay. When it gets wet, it swells. When it dries, it cracks. That movement wreaks havoc on foundations, retaining walls, and any steel buried in the ground. Add in the high humidity and frequent rain, and you've got a recipe for accelerated corrosion.
Then there's the industrial side. Plano is full of warehouses, manufacturing plants, and commercial kitchens. These facilities deal with grease, chemicals, and heavy wear daily. Standard cleaning just doesn't cut it. You need abrasive blasting to strip down to bare metal and start fresh.
Don't forget the hailstorms. Plano gets hammered. Hail can dent metal roofs, crack concrete, and chip paint. If you don't address the damage fast, rust sets in and spreads like cancer. Mobile sandblasting is the only way to truly prep those surfaces for repair.
Here's the thing: DIY sandblasting or hiring a fly-by-night crew is a waste of money. They use cheap abrasives, skip the prep work, and leave you with a surface that fails in months. We've seen it all. That's why we bring the whole rig to your site—no shortcuts, no excuses.
If you see any of these warning signs, it's time to call in the pros:
Steel is the backbone of Plano's infrastructure. From structural beams to storage tanks, it takes a beating. Our mobile rigs use a combination of abrasive media—steel grit, garnet, or crushed glass—depending on the substrate and the coating you're removing. We hit pressures up to 150 PSI at the nozzle, which strips rust, mill scale, and old paint down to a near-white metal finish (SSPC-SP10). That's the standard for a reason: it gives the new coating a tooth to bite into.
We don't just blast and leave you hanging. We match the abrasive to the job. For thin sheet metal, we use a softer media like glass beads to avoid warping. For thick structural steel, we switch to steel shot to cut through heavy corrosion fast. We also handle lead-based paint removal with full containment and disposal—no illegal dumping, no environmental fines.
After blasting, we apply a rust inhibitor if you're not coating immediately. That buys you time in Plano's humid air. We also offer a full service: we can prime and paint after blasting, so you get a one-stop shop. Whether it's a farm gate, a commercial roof, or a bridge beam, we bring the equipment and the know-how to make it last.
Concrete in Plano takes a beating from freeze-thaw cycles and chemical spills. Sandblasting isn't just for metal—it's the fastest way to clean and profile concrete surfaces. We use a technique called abrasive blasting with a fine grit like silica sand or crushed glass to remove stains, old sealers, and laitance without damaging the aggregate.
This is critical for parking garages, warehouse floors, and pool decks. We can strip years of oil stains, tire marks, and paint overspray in hours. The result is a clean, porous surface that's ready for new coatings or overlays. We also do concrete etching for epoxy floor installations—the profile we create ensures the epoxy bonds like it's welded on.
For masonry, we're careful. Brick and stone are softer than concrete, so we use a lower pressure and a finer media. We've restored historic facades in Plano's older districts without scarring the brick. We also remove graffiti from concrete walls and monuments, leaving no ghosting. If you've got a concrete problem, we've got the abrasive solution.
Industrial facilities in Plano run 24/7. Downtime is money. Our mobile sandblasting service is designed to minimize disruption. We roll in with a self-contained dustless blasting system that uses water to suppress dust—that means we can work right next to active operations without contaminating equipment or products.
We strip everything: epoxy, polyurea, fireproofing, and even thick rubberized coatings. Our rigs can handle any surface—tanks, pipes, structural steel, and concrete. We use a mix of recycled glass and garnet for aggressive cutting, and we adjust the pressure to avoid damaging the substrate. We also offer vacuum blasting for hazardous materials like lead or asbestos, so you stay compliant with OSHA and EPA.
We don't just blast; we prep for the next step. We can profile the surface to the exact anchor pattern your new coating spec requires. That means no delamination, no blistering, no callbacks. We've worked with Plano's biggest manufacturing plants and commercial property managers, and they trust us to get the job done right the first time.
Let's talk real numbers. A typical mobile sandblasting job in Plano runs between $2,000 and $5,000 for a residential project, like a driveway or a steel fence. Commercial jobs can go higher—$10,000 to $50,000 depending on square footage and coating type. The $3,500 average is a solid baseline for a mid-sized job.
What drives the cost? Labor is the biggest chunk. Our crew is certified and insured, and we pay them well. We also have to maintain our equipment—compressors, blast pots, nozzles, and dust collection systems. That's not cheap. Then there's the abrasive media. A single job can use 500 to 2,000 pounds of garnet or steel grit, and that adds up. Disposal of hazardous waste, like lead paint, adds another $500 to $1,000.
Why do cheap fixes fail? Because they cut corners. They use sand from the local hardware store, which is too fine and creates dust. They don't contain the blast, so you get a mess and a lawsuit. They don't profile the surface correctly, so your new paint peels in a year. We've seen it all. We give you a detailed quote upfront, with no hidden fees. We also offer free estimates, so you know exactly what you're paying for.
Remember, sandblasting is an investment. A proper job lasts 10-15 years. A cheap job lasts 2-3. Do the math. You'll save money in the long run by doing it right the first time.
We start by walking your property. We look at the surface, the coating, and the substrate. We check for rust, moisture, and contaminants. We also test the thickness of the coating and the condition of the metal or concrete. This tells us what media and pressure to use. We don't guess—we measure.
We also check for hazardous materials like lead or asbestos. If we find them, we adjust our containment plan. We get your input on the desired finish and timeline. Then we give you a fixed quote. No surprises.
Once we've got the green light, we set up our rig. We use a self-contained dustless blasting system that recycles water and abrasive. That means no dust clouds, no mess. We also set up containment barriers and ground covers to protect your landscaping and structures.
We choose the right abrasive for your surface. For steel, we might use steel grit. For concrete, crushed glass. For soft metals, walnut shells. We adjust the pressure to strip the old coating without damaging the substrate. We work methodically, section by section, to ensure even coverage.
After blasting, we inspect the surface again. We check the anchor pattern with a profilometer to ensure it meets spec. If you're coating right away, we apply a rust inhibitor. If not, we can schedule the coating for later.
We clean up the site, removing all debris and abrasive. We dispose of waste properly, including any hazardous materials. We leave your property spotless. Then we do a final walkthrough with you. We stand behind our work with a warranty. That's the permanent solution.
Plano is a big city with diverse neighborhoods. From the historic downtown to the sprawling suburbs, we've got you covered. We're based in Dallas, but we're on the road every day, hitting Plano's streets. We know the local weather patterns—the hot, humid summers and the occasional ice storm. We know the soil that shifts and cracks. We know the industrial parks and the residential communities.
We serve all of Plano, including the areas around Highway 75, the George Bush Turnpike, and Sam Rayburn Tollway. We've worked in neighborhoods like Willow Bend, Kings Ridge, and Russell Creek. We've blasted water towers near the Plano Event Center and commercial kitchens near the Legacy Business Park. No job is too far or too small.