Fast, licensed, and guaranteed. We solve the toughest Mobile Sandblasting problems in the Fort Worth area before they cost you thousands.
Fort Worth's climate is a beast. Hot, humid summers and sudden, violent storms. That combination wreaks havoc on metal, concrete, and wood. The constant freeze-thaw cycles in winter crack surfaces. Then moisture gets in. Rust starts. It spreads fast.
Industrial areas like the Stockyards and the rail yards pump out pollution. That settles on your property. It eats through paint and coatings. If you don't strip it off, you're just painting over a ticking time bomb.
Mobile sandblasting is the only way to truly clean and prep surfaces. We bring the equipment to you. No need to haul heavy parts across town. We set up on-site and get to work. That saves you time and money.
But not all sandblasting is the same. Cheap outfits use low-grade sand. That can damage the surface underneath. They also cut corners on containment. That leaves a mess for you to clean up. We don't do that.
We use premium abrasives and precise pressure. We match the media to the surface. Steel gets a different treatment than concrete. Wood needs a gentler touch. We know the difference.
Fort Worth's older buildings have layers of lead paint. That's a hazard. We handle it safely. We contain every particle. We dispose of waste properly. You get a clean, safe surface ready for a new coat.
Don't wait until rust eats through your equipment. Don't let peeling paint ruin your curb appeal. Call us today for a free inspection. We'll show you what's hiding under the surface.
Heavy machinery takes a beating. Forklifts, trailers, storage tanks, and manufacturing equipment all suffer from rust and grime. We strip it all down to bare metal. Then we apply a fresh, industrial-grade coating. That extends the life of your equipment by years. We use a mix of steel grit and garnet for aggressive cleaning. That removes deep rust and mill scale. We adjust the pressure based on the thickness of the metal. Thin panels get a lower PSI to avoid warping. Thick castings get the full force. We also handle on-site containment. That means no downtime for your operation. We work around your schedule. We can blast and coat in one visit. That gets you back up and running fast. Our crew has over 15 years of experience with industrial equipment. We've seen it all. We know how to handle tricky spots like welds and corners. We don't cut corners. We do it right the first time.
Concrete surfaces collect oil, grease, and mold. That's not just ugly. It's a safety hazard. We use a specialized abrasive blasting method that cleans without damaging the surface. We can remove old coatings, paint, and even tire marks. For concrete, we use a softer media like crushed glass or walnut shells. That cleans without etching the surface. We can also do a deeper cut if you need to profile the concrete for a new coating. That's essential for epoxy or urethane applications. We handle driveways, patios, warehouse floors, and building exteriors. We also clean brick and stone. That removes years of grime and restores the original look. We use a lower pressure for delicate masonry. That prevents chipping and cracking. We always test a small area first. That ensures we get the right result. We also contain all the dust and debris. That keeps your property clean. We leave it looking like new.
Classic cars, trailers, and heavy trucks need special care. We strip paint, rust, and undercoating without damaging the metal. We use a fine abrasive like glass beads or aluminum oxide. That gives a smooth finish that's ready for primer. We can also remove powder coating and anodizing. That's tough to do with other methods. We have a mobile setup that can handle large vehicles. We can blast a full trailer in a day. We also do partial blasting for spot repairs. That saves you money. We protect all the areas you don't want blasted. We mask off windows, trim, and chrome. We use a low-pressure technique for thin sheet metal. That prevents warping and heat damage. We also offer a full service: blast, prime, and paint. That gets you back on the road fast. Our crew is passionate about cars. We treat your vehicle like it's our own. We don't rush. We take the time to do it right.
The cost of mobile sandblasting in Fort Worth varies. It depends on the size of the job, the type of surface, and the level of contamination. For a typical residential project, like a driveway or a small steel structure, you can expect to pay between $1,500 and $5,000. Larger industrial jobs can run $10,000 or more. Our average is around $3,500. That includes labor, materials, and cleanup.
We break down the costs for you upfront. No hidden fees. Labor is the biggest chunk. It takes time to set up, blast, and clean up. We charge by the hour or by the square foot. Materials include the abrasive media, which can cost anywhere from $50 to $200 per ton. We use high-quality media that gets the job done right. Cheap media might save you money upfront, but it can damage the surface and cost you more in the long run.
Why do cheap fixes fail? Some companies use low pressure and cheap sand. That leaves rust and old paint behind. Then you paint over it, and it peels off in a year. You end up paying twice. We do it right the first time. We strip down to bare metal and apply a proper primer. That gives you a surface that lasts for years. We also include containment and disposal in our price. That's not always the case with other companies. They might leave a mess for you to clean up. We don't. We leave your property clean and ready for the next step.
We offer free estimates. We'll come out, assess the job, and give you a firm quote. No surprises. We also offer discounts for multiple jobs or repeat customers. Call us today to get a quote.
We start with a thorough inspection of the surface. We look for rust, corrosion, and old coatings. We check the thickness of the metal or concrete. We also test for lead paint if the building is old. That's a safety issue. We then determine the right abrasive and pressure for the job. We explain everything to you before we start. No surprises.
We set up our mobile rig on your property. We use tarps and containment systems to catch all the dust and debris. Then we blast the surface using the exact media and pressure we specified. We work in sections to ensure even coverage. We check our progress as we go. We adjust if needed. We also protect any areas you don't want blasted.
After blasting, we clean the surface to remove any dust. We then apply a rust inhibitor or primer immediately. That prevents flash rusting. We can also apply a full coating system if you need it. We give you a surface that's ready for paint or a protective coating. We also clean up the site. We remove all debris and leave your property spotless.
We're based in Dallas, but we serve all of Fort Worth and the surrounding areas. We know the local roads and traffic patterns. We can get to you fast. Whether you're near the Stockyards, downtown, or out in the suburbs, we're there. We handle jobs in Tarrant County, Johnson County, and Parker County. We're familiar with the local weather. The high humidity and frequent storms mean rust and corrosion are common. We know how to deal with that. We also know the local regulations for waste disposal. We comply with all environmental laws. We're licensed and insured. You can trust us to do the job right.