Fast, licensed, and guaranteed. We solve the toughest Mobile Sandblasting problems in the Lewisville area before they cost you thousands.
Lewisville sits right in the heart of North Texas, and that location brings a unique set of problems for metal and concrete surfaces. The heat is brutal in the summer, with temps regularly hitting triple digits. That kind of heat bakes paint and coatings onto surfaces, making them brittle and prone to cracking. Then you get the freeze-thaw cycles in the winter. Water gets into those cracks, freezes, expands, and pops the coating right off the substrate. It's a never-ending battle.
On top of the weather, you've got the industrial and commercial activity around the DFW metroplex. If your property is anywhere near the highways or industrial parks, you're dealing with airborne pollutants. Diesel exhaust, chemical fallout, and road grime settle on every surface. That stuff doesn't just sit there—it eats into the paint and metal over time. Rust starts as a little spot, but it spreads fast in this climate.
And let's not forget the humidity. Lewisville gets plenty of moisture in the air, especially in the spring and fall. That moisture is the perfect breeding ground for rust and corrosion. If you've got steel beams, storage tanks, or equipment that sits outside, you're fighting a losing battle without proper surface prep. Mobile sandblasting is the only way to strip it all down to bare metal and start fresh.
Here's the thing: most property owners wait until the damage is obvious. By then, you're not just looking at surface rust—you're looking at pitting, structural weakening, and costly repairs. The smart move is to catch it early. But even if you're past that point, we can bring the surface back to like-new condition. We don't just cover up the problem; we eliminate it.
If you see any of these warning signs, it's time to call in the pros:
Steel and metal surfaces are the backbone of most industrial and commercial properties. But they're also the most vulnerable to corrosion. Our mobile sandblasting service strips rust, mill scale, old paint, and any other contaminants down to bare metal. We use a combination of abrasive media—typically garnet or steel grit—depending on the thickness of the coating and the condition of the steel. The goal is to achieve a near-white metal finish, which is the gold standard for coating adhesion. We follow SSPC-SP10 standards, meaning we remove all visible rust, mill scale, and foreign matter, leaving only light shadows or slight staining. This level of prep is critical for long-lasting paint or powder coating. If you skip it, you're just wasting money on paint that'll peel off in a year. We also handle structural steel, tanks, pipes, and equipment. Our rig is fully self-contained, so we can work anywhere on your property, no matter how remote. We bring the compressor, the blast pot, the media, and the containment—everything needed to get the job done right. And we do it without damaging the surrounding area. We use tarps and vacuum systems to control the dust and debris, so your property stays clean. Whether you're prepping for a new coat of paint or just want to stop the rust in its tracks, we've got the equipment and the know-how to do it right.
Concrete and masonry surfaces take a beating in Lewisville. Between the heat, the rain, and the freeze-thaw cycles, they get stained, chalky, and covered in grime. But you can't just power-wash them and call it a day. That only cleans the surface—it doesn't remove deep-set stains or prepare the surface for sealing or coating. That's where our mobile sandblasting service comes in. We use a softer abrasive, like crushed glass or walnut shells, to gently but effectively remove dirt, oil, grease, and old sealers from concrete, brick, and stone. This process is called abrasive blasting, and it's far more effective than pressure washing. It etches the surface slightly, creating a profile that helps new coatings bond better. We can clean driveways, patios, building exteriors, and even pool decks. The result is a clean, uniform surface that looks new and is ready for whatever you want to put on it—sealer, paint, or just leave it bare. We also handle graffiti removal. That's a big one in urban areas. Graffiti can be tough to remove, especially if it's been there a while. Our blasting method strips it off without damaging the underlying surface. And we do it all with minimal disruption to your business or home. We set up containment, do the job, and clean up. No mess left behind.
Rust is a cancer that spreads if you don't cut it out. On any metal surface, rust starts small—a little orange spot—but it quickly eats through the metal, causing pitting and structural damage. Our rust removal service is aggressive. We use steel grit or aluminum oxide to blast away all rust, scale, and corrosion, down to the bare metal. This isn't just a cosmetic fix; it's a structural one. We remove the rust completely, then we apply a rust-inhibitive primer immediately to prevent flash rusting. The key is timing. Once we blast the metal, it's bare and vulnerable. We have to get the primer on fast, especially in humid weather. Our crew is trained to work quickly and efficiently, so we minimize the window of exposure. We also offer a full coating service—we can apply the primer and topcoat for you, so you get a complete solution in one visit. We handle everything from small equipment to large structural beams. And we do it all on-site, so you don't have to haul heavy, rusty equipment to a shop. We come to you, set up, and get to work. The result is a surface that's not only rust-free but also protected for years to come. Don't let rust eat away at your investment. Call us and we'll stop it in its tracks.
So, what does mobile sandblasting cost in Lewisville? It varies, but the average job runs around $3,500. That might sound like a lot, but let's break it down. You're paying for the equipment, the media, the labor, and the expertise. A typical job involves a crew of two to three guys, a large compressor, a blast pot, and hundreds of pounds of abrasive media. We also have to set up containment to protect the surrounding area from dust and debris. That takes time and materials. And then there's the cleanup. We don't just blast and leave—we clean up every last bit of spent media and dust. That's part of the job.
Now, you might be tempted to go with a cheaper option. Maybe a guy with a pressure washer or a cheap sandblaster from the hardware store. But here's the thing: cheap fixes fail. They don't have the right equipment or the right media. They don't know how to achieve the right surface profile. They might leave rust behind, or they might damage the surface. And then you're back to square one, paying more in the long run. We've seen it happen time and time again.
Our pricing is based on the square footage, the type of surface, and the level of contamination. We give you a detailed quote upfront, so there are no surprises. And we stand behind our work. We guarantee that the surface is properly prepared for coating, or we'll come back and fix it. That's the kind of confidence you get when you hire a professional. So, when you're thinking about the cost, think about the value. A proper sandblasting job can extend the life of your equipment or structure by years. That's a smart investment.
First, we come out to your property and take a close look at the surface. We check for rust, old paint, and any other contaminants. We also assess the condition of the substrate—is it steel, concrete, or something else? We measure the thickness of the coating and look for any hidden damage. This tells us what media to use and how aggressive we need to be. We also check the weather. Humidity and temperature affect the blasting process, so we plan accordingly. We give you a straight answer on what needs to be done and what it'll cost. No fluff, no upselling.
Once we know what we're dealing with, we set up our mobile rig. We position the blast pot, run the hoses, and set up containment. We use tarps and vacuum systems to keep dust from spreading. Then we start blasting. We use the right media at the right pressure to strip the surface clean. We work in sections, so we can inspect our work as we go. If we hit a spot that needs extra attention, we give it. We don't rush. We want to get it right the first time. After we blast, we clean the surface of any remaining dust or debris. It's ready for the next step.
Now that the surface is bare and clean, we apply a protective coating. This could be a primer, a paint, or a specialized coating depending on your needs. We use high-quality products that are designed for the local climate. We apply it evenly and make sure it cures properly. The result is a surface that's not only clean but also protected against the elements. We do a final inspection to make sure everything looks good. Then we clean up the site and leave you with a surface that's ready for years of service. That's the permanent solution.
We're based in Dallas, but we serve the entire Lewisville area. That includes all the neighborhoods off I-35E, like Castle Hills, Highland Village, and the Old Town district. We're familiar with the local weather patterns—the hot summers, the occasional ice storms, and the humidity that causes rust. We know the local building codes and the best routes to get to your property fast. Whether you're near the Vista Ridge Mall or down by the lake, we'll get there on time and ready to work.